Makita donated generators to the Cumbrian flood relief operations to help overcome power loss in this rain devastated area last December. now three new clean and dirty water pumps have been added to the range, all powered by a quiet, low emission 4-stroke petrol engine. These pumps are suited for use in flood relief operations and have been designed for arduous operations in the most testing conditions.
The new Makita EW2050H, EW2051H and EW3051H are all powered by a reliable 169cc engine that comfortably meets the latest EPA Phase 3 and EU emissions regulations running on straight unleaded fuel held in a 3.2 litre tank for long-time running.
The new Makita EW2050H 2″ pump will lift clean water from as low as 8 metres below the pump, up to a maximum head height of 32 metres, at the rate of 520 litres per minute. Flood waters are listed as dirty, as would a pond or fishing lake, where the 2″ Makita EW2051H will shift 700 litres per minute and the larger 3″ model, the EW3051H, will move 1,000 litres per minute. The two dirty-water pumps will generate a head height of 23 metres – over 70 feet above pump level.
All three new Makita EW water pumps are protected by a sump oil level sensor which switches off the engine if the oil level is too low. Housed in a robust steel carry frame, that makes these 26kg pumps easy to handle in transport and stable in operation, starting is easy with the string-pull recoil starter system.
|Displacement||169 cm³||169 cm³||169 cm³|
|Fuel type||Straight Unleaded||Straight Unleaded||Straight Unleaded|
|Fuel Tank Capacity||3.2 litres||3.2 litres||3.2 litres|
|Hose Diameter||50 mm||50 mm||76 mm|
|Pump Type||Clean Water||Dirty Water||Dirty Water|
|Max Delivery Volume||520 litres/min||700 litres/min||1,000 litres/min|
|Max Head||32 m||23 m||23 m|
|8 m||8 m|
|Noise Sound Power||101 dB(A)||103 dB(A)||105 dB(A)|
|Net Weight||24.9 kg||24.9 kg||
- Oil level sensor
- Recoil starter
- In compliance with exhaust emission regulations: EPA Phase 3, EU Stage 3